Routine Maintenance CNC System
CNC system routine maintenance:
1) the development of the daily maintenance of CNC system regulations.
2) should be minimal open CNC cabinets and electric cabinet door.
3) regularly clean cooling ventilation system numerical control device.
4) Periodic maintenance CNC system input / output devices.
5) DC motor periodic inspection and replacement brush.
6) regularly monitors the grid voltage by means of CNC.
7) Replace the memory regularly with the battery.
8) CNC system when not in long-term maintenance.
9) alternate printed circuit board maintenance. For the purchased spare printed circuit boards should be regularly attached to the CNC device is powered operation for some time, to prevent damage.
10) in their maintenance preparatory work:
① technical preparations: in peacetime maintenance personnel should fully understand the performance of the system.
② tools ready: As an end user, maintenance tools need to prepare some conventional equipment, such as an AC voltmeter, DC voltmeter, may also be used for digital pointer, the measurement error is within ± 2% range to . Multimeter is also a common instrument.
③ spare parts ready: once because the CNC system components or component damage, allowing the system to malfunction. Is timely troubleshooting, user should prepare some common spare parts.
CNC system routine maintenance:
1) the development of the daily maintenance of CNC system regulations.
2) should be minimal open CNC cabinets and electric cabinet door.
3) regularly clean cooling ventilation system numerical control device.
4) Periodic maintenance CNC system input / output devices.
5) DC motor periodic inspection and replacement brush.
6) regularly monitors the grid voltage by means of CNC.
7) Replace the memory regularly with the battery.
8) CNC system when not in long-term maintenance.
9) alternate printed circuit board maintenance. For the purchased spare printed circuit boards should be regularly attached to the CNC device is powered operation for some time, to prevent damage.
10) in their maintenance preparatory work:
① technical preparations: in peacetime maintenance personnel should fully understand the performance of the system.
② tools ready: As an end user, maintenance tools need to prepare some conventional equipment, such as an AC voltmeter, DC voltmeter, may also be used for digital pointer, the measurement error is within ± 2% range to . Multimeter is also a common instrument.
③ spare parts ready: once because the CNC system components or component damage, allowing the system to malfunction. Is timely troubleshooting, user should prepare some common spare parts.