/men/news_view.aspx?id=413&gp=106
Daily maintenance of woodworking carving machines
Source:本站Time:2019/1/19 9:18:24
  The working process of a woodworking carving machine itself has a lot of dust, which means it is something that is used in the dust. If it is cleaned every day, it will be troublesome. Therefore, many people not only do not clean it, but also let the machine be piled up with things. This practice is wrong. Maintenance and special precautions for woodworking carving machines: The working process of woodworking carving machines itself has a lot of dust, which means it is something that is used in the dust. If it is cleaned every day, it will be troublesome. Therefore, many people not only do not clean it, but also let the machine be piled up with things. This practice is wrong. We should take good care of the woodworking carving machine so that it can work better for us.
1、 Computer related;
Regularly check for viruses, but be careful not to turn on the antivirus level during work to avoid interference. Regularly clean the dust on the chassis, pay attention to the heat dissipation of the chassis, and be careful not to cause errors in the industrial control card due to excessive dust. Regularly organize disk fragments and optimize computer systems. Computer abnormalities can also cause many problems, especially for computers connected to carving machines. During the maintenance of woodworking carving machines, we found that computer abnormalities have caused us unnecessary trouble and delayed our customers' business. Our technical department has summarized and suggested that customers pay attention to several aspects of computer maintenance.
2、 Cleaning up
Regularly cleaning the industrial control box, dust is the biggest killer of circuit boards. Regularly clean the screw to prevent foreign objects from sticking to it. The screw is important in equipment as it determines the accuracy of the machine and plays a crucial role in the transmission process. After finishing the work, the countertop should be cleaned in a timely manner, which provides convenience for the next work of the woodworking carving machine. Clean the guide rail and the material debris next to it to prevent the machine from getting stuck during operation due to debris interference.
3、 Oil up
After adding oil, walk slowly back and forth to ensure that the lubricating oil can be evenly applied to the guide rail and screw. If the machine is not in use for a long time, it should be regularly refilled and emptied to ensure the flexibility of the transmission system. Firstly, clean the guide rail and screw, and use a cloth (without shedding hair) to remove any oil and material debris from the guide rail and screw. Due to the low temperature, oil can be added to both the guide rail and screw, preferably antifreeze oil. The refueling cycle is twice a month, which means refueling every two weeks.
4、 Temperature
When the machine is not in use, it is best to pour out the water from the water tank if the room temperature is low to prevent freezing and cracking of the water tank and pipes. Ensure the ambient temperature in the operating room, and it is best for the woodworking carving machine to reach room temperature, at least the workers will not be very cold. Check the applicable temperature of the fuel standard, at least reaching the minimum temperature. The temperature does not have a significant impact on woodworking carving machines, but due to users adding butter to the screw and forgetting to clean it in winter, it cannot be turned on every time the machine is turned on. Some studios have very low temperatures, and even though oil is added, it still freezes and the machine cannot run.
5、 Cooling water
If possible, antifreeze can be used for cooling. Pay attention to the ambient temperature and be careful not to freeze or crack the water tank and pipes due to excessively cold water temperature. Cooling water is a necessary condition for the normal operation of the spindle motor. If the cooling water is too dirty, it can cause serious damage to the motor. Ensure the cleanliness of the cooling water and the normal operation of the water pump. Pay attention to the water level and never let the water-cooled spindle motor experience water shortage, which may prevent the motor from exporting heat in a timely manner.
  • Top
  • Copyright ? 濟南華維數(shù)控