/men/news_view.aspx?id=491&gp=160
Operation process of woodworking carving machine
Source:本站Time:2023/10/17 9:18:55

Woodworking carving machine is a specialized mechanical equipment used for carving wood, and its operation process is as follows:

1. Preparation: Firstly, the engraving machine needs to be installed on a stable workbench and connected to power and air sources. Then, according to the requirements of the carved pattern, fix the wooden board on the workbench.

2. Adjust the engraving machine: Before starting engraving, it is necessary to adjust the cutting tools and speed of the engraving machine. The size and shape of the cutting tool should be selected according to the requirements of the carving pattern, and the speed should be adjusted according to the hardness of the wooden board and the depth of the carving.

3. Start carving: After adjusting the carving machine, you can start carving. During the carving process, it is necessary to closely observe the working status of the carving machine to ensure its normal operation.

4. Complete carving: After carving is completed, the wooden board needs to be removed from the workbench and necessary trimming and polishing should be carried out to make its surface smooth and flat.

5. Cleaning the workbench: After completing the carving, it is necessary to clean the wood chips and dust on the workbench to maintain a clean working environment.

In general, the operation process of a woodworking carving machine mainly includes preparation work, adjusting the carving machine, starting carving, completing carving, and cleaning the workbench. During the operation, it is necessary to pay attention to safety and avoid accidental injuries.

  • Top
  • Copyright ? 濟南華維數(shù)控