1, two-spindle carving: on the same pattern can be double-spindle simultaneously, greatly increasing the processing speed of the plate, a piece of equipment to complete the processing efficiency of the two devices, and product consistency, high quality;
2, single-spindle carving: In some processing capacity is not the case when machining large workpieces can be moved or the side of a spindle, single-spindle work independently, makes the human design, effective and reasonable control of production costs.
3, the overall steel structure welding tempering aging treatment, solid shape. Gantry mobile, fixed working table can be arbitrary processing work surface material.
4, the Y-axis machine Taiwan Yintai PMI precision rack side rails + dual-drive, can be re-cutting. Taiwan Yintai PMI four-row ball bearing linear guides + self-lubricating block, carving equal force in all directions to ensure the accuracy and mechanical strength.
5, embedded DSP numerical control system (read U disk) or PCI controller card can be realized Resume carving, power and memory, can be completely offline.
6, compatible Type3 / Artcam / carved / Wentai and other CAD / CAM design software to generate G code for processing.
7, designed for high-volume, small parts machining customers design, suitable for processing cabinet doors, gifts, relief products, non-ferrous metal, EVA and other materials, cutting and engraving products industry.
Product parameters:
Specifications Model |
SW-1325 |
Processing size |
1300 * 2500 * 200mm |
Spindle power |
3KW * 2 / 4.5KW * 2 (optional Italian air-cooled spindle) |
Transmission |
Taiwan Intime side rails + high-precision rack |
Processing speed |
15000mm / min |
Spindle speed |
6000-24000rpm |
Control |
DSP DSP numerical control system (read U disk) / PCI control card |
Tool |
¢ 3.175mm /¢4mm/¢6mm/¢12.7mm |
Software Support |
TYPE3, ARTCAM, UCANCAM, carved |
Precision |
± 0.02mm |
Drive system |
stepper motor 450B + Lemire MA860H drive (optional servo drive) |
Warranty |
II years (excluding consumables) |
Selection of solid wood doors of the main door, in particular wood composite materials, and save the advantages of natural wood and avoid the easy deformation cracking defects. Selection is important, but in the production process, pay attention to a fine. Traditional handmade crafts has gradually been replaced by machinery production. Woodworking engraving machine as the new darling of wooden doors now has been more and more favored by manufacturers of wooden doors. First, as the mechanized equipment than the artificial production of high efficiency, and low defect rate. Most wood engraving machine adopts gantry structure, can be adjusted to meet the limits of the maximum feed. Heavy steel bed, ensure the overall stability of the machine. Circular guide rail or square rail support surface stability. Rack drive, smooth transmission, to ensure the long high speed run no distortion, no jitter. So elaborately carved wooden doors to ensure the accuracy and beauty of sculpture, thus greatly improving the efficiency in the production of wooden doors.
Suitable for mahogany, solid wood, MDF, hibiscus board, PVC, acrylic and other batch processing, greatly advances the consumption efficiency, saving time and effort to complete the batch job consumption. By brand imported nut smooth transmission, high precision, accurate knife.
All mechanical engraving machine carving knives are some of the materials required, here are some examples for you:
1, precision machining of small reliefs, round bottom graver use referrals.
2, cork, MDF, native wood, like some large deep relief processing, and recommended the use of blade screw ball end mill.
3, want to do more sophisticated processing, the following requirements on burr-free cutting, it is recommended to use a single blade, double-edged upper and lower cutters.
4, acrylic cutting, it is recommended to use a single blade spiral cutter, the processing characteristics are tasteless smoke-free, fast, high efficiency, non-stick dust, real environmental protection.
Now people have to buy the door gradually moving to high-end environmentally friendly low-carbon products and services. Wooden door is preferred, it is not only handsome in appearance, work well, but also because of its environmental performance. For buyers, although your point, but the quality is guaranteed. Because the mechanized production of sheet metal requires special processing of both for volatilization of formaldehyde also played a low-carbon environmental effects.
On the production of more than 1,000.
Professional sales and service team, timely and efficient solution to your problem.
National unified sales hotline:400-6587-688 |
Ji'nan Hua Wei CNC Equipment Co., Ltd. |
Address: Ji'nan City, Shandong Province, China Road No. 18-1 Zip code:250000 TEL:+86-531-88620266 FAX:+86-531-88276988 Phone number:15853195586 E-mail: cncmachine@jnhwcnc.com |